Table of Contents
Advertisement
Setting Call Forward
from the NBX NetSet
Utility
Call Forward Busy
To set Call Forward Busy:
1 Pick up the handset, and press Feature + 467.
2 Dial the number that you want to forward calls to and press .
3 To turn off Call Forward Busy, pick up the handset and press Feature +
467 again.
Call Forward All
To set Call Forward All:
1 Pick up the handset, and press Feature + 465.
2 Dial the number that you want to forward calls to and press .
3 To turn off Call Forward All, pick up the handset and press Feature + 465
again.
From the NBX NetSet utility, you can set default call forwarding or choose
to override the default with a condition for call forwarding (No Answer,
Busy, or All) and a destination. For telephone numbers, do not use
parentheses, hyphens, or spaces. When you specify an external telephone
number, start by entering a 9 or 8 or whatever is required to access an
outside line. Example: 912815551212 dials (281) 555-1212. You can
enter a * if a pause is required between an access code and a destination
number.
Default
The Call Forward page defines basic call forwarding. You choose from
four destinations: voicemail box, a phone number, the automated
attendant, or disconnection. You can override these settings on the Call
Forward Override page or by making changes on the telephone.
To set the default call forwarding:
1 Log in to the NBX NetSet utility and go to Call Forward > Call Forward.
2 Select the number of rings you want the caller to wait before the call
coverage point is activated.
Forwarding Incoming Calls
#
#
43
Advertisement
Table of Contents
