Attaching And Adjusting The Fixed Support Bracket; Low-Profile And High-Profile Positions - 3Com 3102 User Manual

Attaching and
Adjusting the Fixed
Support Bracket
Low-Profile and
High-Profile Positions
Figure 16 Wall Mounting
1 Bottom supports
When you mount a device on a wall, attach the support bracket and
adjust it so that the bottom of the support bracket rests against the
bottom supports on the device.
Safe wall mounting requires 3/4-inch drywall and 1.5-inch drywall screws.
The fixed support bracket is common to the following devices:
3Com1105 Attendant Console
3Com 1102, 2102, and 2102-IR Business Telephones
The fixed support bracket can be attached in low profile, high profile, or
wall mount positions. Tabs on the underside of the telephone slip into
slots on the bracket, and the opposite mounting points snap into place.
In Figure 17, the support bracket is outlined to show you how to install
the device in the low-profile and high-profile desktop positions.

Attaching and Adjusting the Fixed Support Bracket

125