Setting Call Forward From The Nbx Netset Utility - 3Com 3103 User Manual

50 C 4: S
HAPTER TANDARD
Setting Call Forward
from the NBX NetSet
Utility
F
EATURES
3 Press Select.
You can also use the Feature Code 465 to turn Call Forward All on and
off.
From the NBX NetSet utility, you can set default call forwarding or choose
to override the default with a condition for call forwarding (No Answer,
Busy, or All) and a destination. For telephone numbers, do not use
parentheses, hyphens, or spaces. When you specify an external telephone
number, start by entering a 9 or 8 or whatever is required to access an
outside line. Example: 912815551212 dials (281) 555-1212. You can
enter a * if a pause is required between an access code and a destination
number.
Default
The Call Forward page defines basic call forwarding. You choose from
four destinations: voicemail box, a phone number, the automated
attendant, or disconnection. You can override these settings on the Call
Forward Override page or by making changes on the telephone.
To set the default call forwarding:
1 Log in to the NBX NetSet utility and go to Call Forward > Call Forward.
2 Select the number of rings you want the caller to wait before the call
coverage point is activated.
3 Select the call coverage point:
If you select Forward to voicemail box, the caller can leave a
message.
If you select Forward to phone number, enter that extension or
external phone number in the box.
The number that you choose may be limited by your call permissions. To
view your permissions, go to My Calling Privileges > Call Permissions.
The selection for Forward to phone number specifies where you
want to forward calls that are not answered at your internal extension.
If you check the box below the Forward to phone number, calls that
are unanswered at the number you forward them to are passed on to
your choice of:
User Voicemail — Your voicemail box