Add Ipx Route <Ipx_Net_Address; Add Ipx Service [Service_Name - 3Com OfficeConnect Remote 812 Cli User's Manual

add ipx route
<ipx_net_address>
add ipx service
[service_name]
address Address of the IPX network.
interface Name of the interface with which this IPX network is to be associated. The
default is the first LAN interface (eth:1).
enabled Optional parameter indicates whether the network is enabled (YES) or
disabled (NO) by this command. YES is the default.
frame Frame encapsulation chosen for this IPX network.
gateway [ipx_host_address]


metric [metric_number]


ticks [tick_number]


Adds an IPX static route (for the LAN) to the system's IPX Route table, which
defines static routes to remote IPX networks.
The command list ipx routes displays currently defined static routes.
Parameter Description
<ipx_net_address> IPX network address requiring a route.
gateway IPX address of the host which will act as a gateway. The format is
nnnn.xx:xx:xx:xx:xx:xx (net_addr.mac_address).
metric Number of "hops" through different routers needed to reach the remote
IPX network.
ticks Estimated interval in ticks it takes to deliver a packet to the remote
network. There are approximately 18 ticks per second.
address [internal network number]


gateway [network_number.mac_address]


metric [metric]


node [internal_node_number]


socket [socket_number]


type [service_type]


Adds a static IPX service (for the LAN) to the IPX services table. You must supply
the name, internal ipx network number, node number, socket, and type of service
for this service. The user must also supply gateway information to indicate the
next router hop. To remove this service, use the delete ipx service command.
Parameter Description
service name Designation of IPX service.
address Internal network number for the IPX service on which this service resides.
Gateway Address of the router you defined as the gateway.
metric An integer representing how far away the default router is, in "hops" through
other routers. Values: 1-15.
node The internal MAC address of the server on which the service resides. This is
typically 00:00:00:00:00:01.
type Type of service: hex number referring to file server, print server, etc. Refer to
the table below.
socket Socket number that the service uses.
CLI Commands B-5