Settings For Ppp Bundle 1; Settings For Ppp Bundle 1 Compression Operational Status - Opened Or Not Opened; Settings For Ppp Link - 3Com OfficeConnect Remote 812 Cli User's Manual

B-52 A B: CLI C
PPENDIX OMMAND
D
ESCRIPTION

SETTINGS for PPP BUNDLE 1

Operational Status - opened or not opened


Number Active Links - number of links active on this PPP bundle


User Profile - user whose parameters were used in creating links


Local MMRU - MRU the remote entity uses when sending packets to local


PPP entity. Default: 1514
Remote MMRU - MRU the local entity uses when sending packets to


remote PPP entity. Default: 1514
Local Endpoint Class - type of address used as the identifier


Local Endpoint Length - maximum length of the local Endpoint


Discriminator Address, default is 6
Local Endpoint ID - value of the local Endpoint Discriminator Address


Remote Endpoint Class - value of the remote Endpoint Discriminator


Class, which indicates the type of address being used as the identifier
Remote Endpoint Length - maximum length of the remote Endpoint


Discriminator Address
Remote Endpoint ID - value of the remote Endpoint Discriminator Address


SETTINGS for PPP BUNDLE 1 COMPRESSION
Operational Status - Opened or Not Opened
Compression Protocol - authentication protocol used by the local PPP


entity when it authenticated the local PPP entity to the remote PPP entity:
PAP, CHAP or NONE

SETTINGS for PPP LINK 1 - 5

Operational Status - opened or not opened


Interface Index - index number of the interface used


Local MRU - MRU the remote entity uses when sending packets to local


PPP entity. Default: 1514
Remote MRU - MRU the local entity uses when sending packets to remote


PPP entity, default is 1514
Local to Peer ACC Map - value of the ACC Map used for sending packets


from the local PPP entity to the remote PPP entity
Peer to Local ACC Map - ACC Map used by the remote PPP entity when


transmitting packets to the local PPP entity
Local To Remote Protocol Compression - Indicates whether the local PPP


entity will use Protocol Compression when sending packets to the remote
PPP entity. Default: ENABLED.
Remote To Local Protocol Compression - Indicates whether the remote


PPP entity will use Protocol Compression when transmitting packets to the
local PPP entity. Default: ENABLED.
Local To Remote ACC Compression - Indicates whether the local PPP


entity will use Address and Control Compression when sending packets to
the remote PPP entity. Default: ENABLED.