Show Ipx Network <Network_Name> Settings; Show Ipx Rip - 3Com OfficeConnect Remote 812 Cli User's Manual

show ipx network
<network_name>
settings

show ipx rip

RIP In Packets - sum of RIP packets received


SAP Out Packets - sum of SAP packets transmitted


SAP In Packets - sum of SAP packets received


Displays parameter settings for the specified IPX network. You can modify most of
these values using the set ipx network command.
Interface - interface this IPX network uses


Network Address - network address of this IPX network


Frame Type - frame type used by the interface (ETHERNET II, SNAP, or


LOOPBACK)
Maximum Packet Size - maximum allowable packet size for this IPX


network. Default is 1500.
Status - operational state of the network


Network Delay (ticks) - time in number of ticks it takes to reach this IPX


network
Network Learning Retries - number of times this network will re-send


packets to discover its directly connected neighbors
Diagnostics - sending of diagnostic packets ENABLED or DISABLED


NetBIOS - support ENABLED or DISABLED


NetBIOS Name Caching - support ENABLED or DISABLED


NetBIOS Cache Timer (sec) - interval a NetBIOS system will be kept in the


cache
NetBIOS Maximum Hops - most hops this network will make to locate a


NetBIOS system
RIP - RIP status


RIP Update (sec) - number of seconds to wait before aging out RIP entries


RIP Age Multiplier - number to multiply the rip_update_interval by, to


obtain the value for aging out the entries in the RIP database
RIP Max Packet Size - largest allowable size of a RIP packet


SAP - SAP state


SAP Update (sec) - number of seconds to wait before aging out SAP


entries
SAP Age Multiplier - number to multiply the sap_update_interval by, to


obtain the value for the aging out entries in the SAP database
SAP Packet Size - greatest allowable size of a SAP packet


SAP Nearest Server Reply - SAP seeks nearest neighbors, YES or NO


settings


counters


Displays information about RIP for IPX.
CLI Commands B-49