Set Vc <Vc_Name - 3Com OfficeConnect Remote 812 Cli User's Manual

Release 2.0
Hide thumbs Also See for OfficeConnect Remote 812:
Table of Contents

Advertisement

B-36
A
B: CLI C
PPENDIX
OMMAND
set vc <vc_name>
D
ESCRIPTION
session_timeout
Interval before timing out a session.
tcp_port
TCP Port number for the Telnet session.
Terminal_type
The type of terminal. This is an alphanumeric string, of up to 64 characters.
address_selection [negotiate | assign | specified]

bridging [enable | disable]

default_route_option [enable | disable]

destination_address [ip address]

end_time [ HH:MM:SS ]

header_compression [none | TCPIP]

idle_timeout [seconds]

input_filter [filter_name]

ip [enable | disable]

ip_routing [listen | send | both | none]

ip_source_validation [enable | disable]

ipx [enable | disable]

ipx_address [ipx_addr]

ipx_routing [all | listen | respond | send | none]

ipx_wan [enabled | disabled]

local_IP_address [ip_net_address]

mac_routing [enable | disable]

MTU [number]

NAT_option [disable | enable | nat | pat | super_nat]

PAT_default_address [ip_addr]

network_service [ppp | PPPLLC | RFC_1483]

output_filter [filter_name]

password [ password ]

remote_ip_address [ip_addr]

rip [ripv1 | ripv2]

rip_authentication [string]

rip_policies_update [rip_policies]

send_name [ ]

send_password ["text string"]

type [ONDEMAND | CONTINUOUS | MANUAL]

Specifies parameters for VCs.

Advertisement

Table of Contents
loading

Table of Contents