Add Network Service Example; Add Snmp Community <Community_Name - 3Com OfficeConnect Remote 812 Cli User's Manual

B-8 A B: CLI C
PPENDIX OMMAND
add snmp community
<community_name>
D
ESCRIPTION
close_active_connections [TRUE | FALSE]


This configures a network listener process that provides a certain type of service.
To see the available server types, use list services.
Parameter Description
<service_name> Name of this type of service. Limit of 32 character ASCII string.
server_type Designates the type of server:
HTTP
SNMPD - SNMP agent
TFTPD - server for file transfers
TELNETD - TELNET server to the CLI
socket Indicates which "socket" the server listens on. For TFTP and TELNET, it is the
TCP or UDP port #.
enabled This indicates whether the network service is enabled. Enter YES or NO.
data Ancillary Data. This field contains server-specific configuration data. See the
table on the next page for settable ancillary data parameters for TELNET.
close_active_ Indicates whether or not to close any active connections when a service is
disabled by the disable network_service command. Default: FALSE.
connections
The table below shows configurable parameters for TELNET services, which are
specified with the data parameter.
Ancillary Data Description
Parameter
auth On indicates that login/password authentication should be performed on
incoming connections.
Default: on.
Format: auth=[on/off]
login_prompt ASCII string specifying the login prompt to be sent during authentication.
It must be quoted.
Default: "login: "
Format: login_prompt=[string]
login_banner ASCII string sent to a client when the connection is made. It must be
quoted. Default: none.
Format: login_banner=[string]

Add network service example

To configure a TELNET service to offer CLI access on port 23, doing authentication
upon connect:
add network_service CLI_access server_type TELNETD socket 23
address [ip_address]


access [RO | RW]