Add Network Service <Service_Name> Status - 3Com OfficeConnect Remote 812 Cli User's Manual

add network service
<service_name> status
You must supply the name, internal ipx network number, node number, socket,
and type of service for this service. The user must also supply gateway information
to indicate the next router hop.
Parameter Description
<name> The name of the user for the IPX route.
Petitioned IPX address of the route, in IPX (xxxxxxxx) form.
Hops An integer representing how far away the route is, in "hops" through other
routers. Values are 1-15.
name Estimated interval in ticks it takes to deliver a packet to the remote network.
There are approximately 18 ticks per second.
node The internal MAC address of the server on which the service resides. This is
typically 00:00:00:00:00:01.
socket Indicates which "socket" the server listens on.
type Type of service: hex number referring to file server, print server, etc. Refer to
the table below.
Below is a partial list of the IPX services available:
Type
04
05
07
09
0A
21
2E
47
4B
4C
7A
98
9A
9E
107
111
166
26A
26B
278
server_type [server_type]


socket [socket_number]


enabled [YES]


data ["string"]


Description
file server
job server
print server
archive server
job queue
NAS SNA gateway
dynamic SAP
advertising print server
Btrieve VAP 5.0
SQL VAP
TES-NetWare VMS
NetWare access server
Named Pipes server
PortableNetWare-UNIX
NetWare 386
Test server
NetWare management
NetWare management
Time synchronization
NetWare Directory server
CLI Commands B-7