Quick Setup Ipx Information - 3Com OfficeConnect Remote 812 Cli User's Manual

The OCR 812 can act as a DHCP server, providing IP addresses to other stations on
the local LAN.
Question
Do you want the OfficeConnect Remote 812 to act
as a DHCP server?
Enter the start address for the DHCP IP address
pool:
Enter the end address for the DHCP IP address
pool:
It is possible to restrict access to the TFTP server to a specific system or a list of
systems. Quick Setup will allow you to enter one system that is allowed or allow
access to all systems.
Question
Do you want to allow all systems to access the TFTP
server?
IP setup is completed.

Quick Setup IPX Information

The network name is used by the OCR 812 to identify your IPX network.
Question
Enter the name of your network:
The network number is a non-zero hexadecimal number of up to 8 digits.
Question
Enter the ipx network number:
You need to specify the framing for the IPX network. It should be one of the
following: "ethernet_ii", "snap", "dsap", "novell_8023."
Question
What is the framing for the IPX network ?
CLI Quick Setup Script
Default Your System
[yes]
[ ]
[ ]
Default
[yes]
Default Your System
[ipx]
Default System
[ ]
Default System
[ethernet_ii]
4-5
Your System