White Indicator Lights; Gray Indicator Lights; Blue Indicator Lights - Jeep GLADIATOR 2020 User Manual

White Indicator Lights

— Adaptive Cruise Control (ACC) Ready
Light — If Equipped
This light will turn on when the vehicle
equipped with Adaptive Cruise Control (ACC)
has been turned on, but not set. Refer to
"Adaptive Cruise Control (ACC)" in "Starting
And Operating" for further information.
— Two Wheel Drive High Indicator Light
— If Equipped With a Premium Cluster
This light alerts the driver that the vehicle is
in the two wheel drive high mode.
— Cruise Control Ready Indicator Light —
If Equipped With A Premium Instrument
Cluster
This light will turn on when the speed control
has been turned on, but not set. Refer to
"Speed Control" in "Starting And Operating"
for further information.
— Cruise Control SET Indicator Light — If
Equipped With Base Instrument Cluster
This indicator light will illuminate when the
speed control is set.
Refer to "Speed Control" in "Starting And
Operating" for further information.
— Selec Speed Control Indicator Light
This light will turn on when "Selec Speed
Control" is activated.
To activate "Selec Speed Control", assure
the vehicle is in Four Wheel Drive Low (4WD/
4L) and push the button on the instrument
panel.
NOTE:
If the vehicle is not in Four-Wheel Drive Low
(4WD/4L), "To Enter Selec-Speed Shift to
4WD Low" will appear in the instrument
cluster display.

Gray Indicator Lights

— Cruise Control Ready Indicator Light —
If Equipped With Base Instrument Cluster
This light will turn on when the speed control
has been turned on, but not set. Refer to
"Speed Control" in "Starting And Operating"
for further information.

Blue Indicator Lights

— High Beam Indicator Light
This indicator light will illuminate to indicate
that the high beam headlights are on. With
the low beams activated, push the multi-
function lever forward (toward the front of
the vehicle) to turn on the high beams. Pull
the multifunction lever rearward (toward the
rear of the vehicle) to turn off the high
beams. If the high beams are off, pull the
lever toward you for a temporary high beam
on, "flash to pass" scenario.
ONBOARD DIAGNOSTIC
SYSTEM — OBD II
Your vehicle is equipped with a sophisticated
Onboard Diagnostic system called OBD II.
This system monitors the performance of the
emissions, engine, and transmission control
systems. When these systems are operating
properly, your vehicle will provide excellent
performance and fuel economy, as well as
engine emissions well within current govern-
ment regulations.
69