Freedom Top And Hard Top - Jeep GLADIATOR 2020 User Manual

6. Secure the hook-and-loop fastener at the
upper front corner of each quarter panel
cover by pressing firmly.
Quarter Panel Hook-And-Loop Fastener
7. Reinstall the rear window along the top,
keeping it level, followed by the retainer
at the bottom of the rear window.
NOTE:
When reinstalling the rear window, be sure to
engage the retainers on both sides, and tuck
the rear window under the soft top fabric.
42

Freedom Top And Hard Top

To Remove Freedom Top Panels
NOTE:
The left side panel must be removed before
removing the right side panel.
1. Fold down the sun visor against the wind-
shield.
2. Turn the three L-shaped locks on the left
side panel (one at the front, the rear, and
outside), unlocking them from the roof.
Roof Panel Lock Locations
3. Unlatch the left side header panel latch
located at the top of the windshield.
4. Remove the left side panel.
5. Repeat the steps above to remove the
right side panel.
NOTE:
Vehicles equipped with a Freedom Top,
come with a Freedom Top storage bag that
allows you to store your Freedom Top panels.
Refer to "Freedom Top Storage Bag" in
"Getting To Know Your Vehicle" in the
Owner's Manual for further information.
To Reinstall Freedom Top Panels
Follow the removal instructions in reverse
order, replacing the right side panel before
the left side panel.
NOTE:
To prevent water leaks, the seals and
Freedom Top Panels should be clear of any
dust and debris prior to reinstallation.
Hard Top Removal
1. Remove both front panels as described
above.
2. Open both doors.