Table of Contents
Advertisement
5. Using a #50 Torx head driver, remove the
two fasteners securing the Tonneau
Cover to the front of the truck bed.
Fastener Locations
6. Utilizing two people, lift the Tonneau
Cover up and away from the truck bed.
NOTE:
Be sure the Tonneau Cover has been
completely rolled up, and straps are secure,
before removing.
7. Store in a safe location.
56
Tonneau Cover Installation
To Install the Tonneau Cover, proceed as
follows:
1. Position the rolled up Tonneau Cover on
the truck bed and align it to the two
fastener locations at the front of the bed.
Fastener Locations
2. Using a #50 Torx head driver, secure the
fasteners to the bed.
3. Lower the tailgate to the fully open posi-
tion before unrolling the Tonneau Cover.
4. Release the stowage straps used to
secure the Tonneau Cover in the rolled up
position.
Release Stowage Strap
5. Roll the Tonneau Cover rearward toward
the back of the truck bed.
Rolling Tonneau Cover Rearward
Advertisement
Table of Contents
