Table of Contents
Advertisement
NOTE:
The vehicle is equipped with stow clips
located on the lower trim, next to the rear
seats. Use these clips to hold the seat belt
out of the path of the seat back when it is
being folded and raised.
You may experience deformation in the
seat cushion from the seat belt buckles if
the seats are left folded for an extended
period of time. This is normal. By simply
opening the seats to the open position, the
seat cushion will return to its normal
shape over time.
WARNING!
Be certain that the seatback is securely
locked into position. Perform a "push -
pull - push" check to confirm the seat is
fully locked. If the seatback is not securely
locked into position the seat will not
provide the proper stability for child seats
and/or passengers. A red indicator on the
pull strap will be displayed if the seatback
is not securely locked. An improperly
latched seat could cause serious injury.
Rear Seat Stadium Position
The rear seat bottoms can be folded upward
into the Stadium Position to create more
storage space on the vehicle's floor, and to
access the under seat storage bins (if
equipped).
To fold the seat bottom upward, proceed as
follows:
1. Lift upward on each section of the seat
bottom.
Lift From Beneath Seat (Left Side Shown)
2. Raise the seat bottom upward into the
Stadium Position.
Stadium Position
To return the seat bottom to the normal posi-
tion, push downward on the raised seat
bottom.
HEAD RESTRAINTS
Head restraints are designed to reduce the
risk of injury by restricting head movement in
the event of a rear impact. Head restraints
should be adjusted so that the top of the
head restraint is located above the top of
your ear.
25
Advertisement
Table of Contents
