Proper Mounting; Incorrect Mounting - Siemens SITRANS LR560 Operating Instructions Manual

Direct sunlight
Device damage.
The device can overheat or materials become brittle due to UV exposure.
• Protect the device from direct sunlight.
• Make sure that the maximum permissible ambient temperature is not exceeded. Refer
Insufficient air supply
The device may overheat if there is an insufficient supply of air.
• Install the device so that there is sufficient air supply in the room.
• Observe the maximum permissible ambient temperature. Refer to the information in the
4.1.2

Proper mounting

4.1.2.1

Incorrect mounting

NOTICE
Incorrect mounting
The device can be damaged, destroyed, or its functionality impaired through improper
mounting.
• Before installing ensure there is no visible damage to the device.
• Make sure that process connectors are clean, and suitable gaskets and glands are
• Mount the device using suitable tools.
Loss of type of protection
Damage to device if the enclosure is open or not properly closed. The type of protection
specified on the nameplate or in Approvals data (Page 174) is no longer guaranteed.
• Make sure that the device is securely closed.
LR560 (FOUNDATION FIELDBUS)
Operating Instructions, 06/2018, A5E34648692-AE
CAUTION
to the information in Technical data (Page 171).
WARNING
section Technical data (Page 171).
used.
CAUTION
Installing/mounting
4.1 Basic safety instructions
25