Security (6.); Remote Lockout (6.1.1.); Write Protect (6.2.1.); Local Operation (6.2.2.) - Siemens SITRANS LR560 Operating Instructions Manual

8.6

SECURITY (6.)

8.6.1

REMOTE LOCKOUT (6.1.1.)

Note
If remote lockout control is changed to limit remote access, it can be reset only via the
handheld programmer.
Enables or disables programming via the network and AMS Device Manager.
Options
8.6.2

WRITE PROTECT (6.2.1.)

Factory setting:
Setting range:
Purpose:
Description:
8.6.3

LOCAL OPERATION (6.2.2.)

Enables or disables programming via the handheld programmer.
Options
Note
Once disabled via the handheld programmer, the parameter is no longer visible on the local
display and can only be reset using AMS Device Manager. However, if no communication
activity exists for 30 seconds, the parameter will again be visible on the local display.
To access this parameter via AMS Device Manager see Local display under Setup (LCD)
(Page 85).
8.7

LANGUAGE (7.)

Factory setting:
Setting range:
Purpose:
LR560 (FOUNDATION FIELDBUS)
Operating Instructions, 06/2018, A5E34648692-AE
* OFF Remote operation enabled
ON Remote operation disabled
Unlock value (2457): Lock Off
0 to 9999
Unlock value (2457)
Any other value
Prevents any changes to parameters.
To turn Lock On, key in any value other than the Unlock Value 2457.
•
To turn Lock Off, key in the Unlock Value 2457.
•
DISABLED
* ENABLED
English
English, Deutsch, Français, Español, 简体中文
Selects the language to be used on the local display.
Parameter Reference
8.6 SECURITY (6.)
Lock Off
Lock On
157