IBM ServeRAID-4 Ultra160 Series User Reference page 64

Figure 17. Configure controller for clustering window
10. In the Main Tree, click the second ServeRAID controller that you want to
11. Click
46
®
IBM User's Reference: ServeRAID
6. In the Main Tree, click the first ServeRAID controller that you want to
configure.
(Configure for clustering) on the tool bar. The Configure
7. Click
controller for clustering window opens.
8. Provide the following information.
Notes:
a. The controller name and partner name are case sensitive.
b. If your configuration will contain multiple ServeRAID controller pairs, each
controller name must be unique.
Controller name
Enter a name to identify the first controller, for example, Controller A.
Partner name
Enter a name that you will use to identify the second controller, for
example, Controller B.
SCSI initiator IDs
The system presets these IDs to 7. Set each ID to 6 for shared
channels.
Note: The ServeRAID Manager program does not permit you to enter
numbers other than 6 and 7.
9. Click OK.
configure.
(Configure for clustering) on the tool bar. The Configure
controller for clustering window opens.
™
-4 Ultra160 SCSI Controller