IBM ServeRAID-4 Ultra160 Series User Reference page 30

Figure 6. Connecting a ServeRAID-4H controller internal channel connector
11. Connect the other end of the SCSI cable to the SCSI backplane or to a SCSI
12. If you have physical drives to install, install them now. See your server
13. Install the server cover.
14. If you disconnected the cables and power cords in step 2 on page 10,
15. If you want to attach an external SCSI device to the ServeRAID controller, go
12
®
IBM User's Reference: ServeRAID
device in the server. (See your server documentation or the system label inside
the server cover for the location of the SCSI connector on the backplane.)
documentation for drive installation instructions.
Note: The ServeRAID controllers use SCSI ID 7.
reconnect the cables and cords. See your server documentation if you need
detailed instructions.
to "Connecting external devices" on page 13. Otherwise, go to "Chapter 3.
Understanding RAID technology" on page 15.
™
-4 Ultra160 SCSI Controller