Validating A Cluster - IBM ServeRAID-4 Ultra160 Series User Reference

Figure 30. Configure for clustering window
5. Click Shared or Non-shared for the logical drive you have just defined.
6. Select the merge group number you want to use for the logical drive you just
7. Click OK.
8. If you are using Windows NT 4.0, continue with "Creating additional ServeRAID

Validating a cluster

Use this feature to determine if your cluster is configured correctly.
Note: You must have the ServeRAID Manager program installed on all servers in
To validate a cluster, do the following:
1. In the Main Tree, click a server in the cluster.
2. Click Actions → Validate cluster. A window similar to the following opens.
defined.
disk resources on a Windows NT 4.0 ServeRAID cluster" on page 110.
If you are using Windows 2000, continue with "Creating additional ServeRAID
disk resources on a Windows 2000 ServeRAID cluster" on page 118.
the cluster for this feature to work.
Chapter 15. Monitoring and updating an IBM ServeRAID Cluster Solution
125