IBM ServeRAID-4 Ultra160 Series User Reference page 127

9. On Server B, make it join the cluster by doing the following.
Note: The directory name and path where the MSCS software is installed
must be the same on both servers.
a. Insert the Windows NT Server Enterprise Edition Component CD into the
CD-ROM drive on Server B. Type the following command (from either a
command line or Add/Remove Programs in the Control panel) and press
Enter:
d:\MSCS\CLUSTER\I386\SETUP
where d is the CD-ROM drive letter.
b. Install the Microsoft Cluster Service software following the instructions in
the documentation that is included with the MSCS software.
Server B will restart when the installation is completed.
10. Install the IBM ServeRAID Windows NT Cluster Solution program by doing the
following:
a. On Server A, run the utility SETUP.EXE program from the IBM ServeRAID
Windows NT Cluster Solution diskette or IBM ServeRAID Support CD and
follow the instructions that appear on the screen.
v If you are using the diskette, type the following command from a
Windows NT command line:
a:\setup
where a is the diskette drive letter.
v If you are using the CD, type the following command from a Windows
NT command line:
d:\programs\winnt\cluster\setup
where d is the CD-ROM drive letter.
b. When the program has completed, run the SETUP.EXE program on Server
B.
After the utility has been installed on both servers, all shared ServeRAID
groups and disk resources will be automatically created by the IBM
ServeRAID Cluster Solution setup program and then brought online. Server
A is the current owner of these groups.
11. Move the quorum resource from localquorum to a ServeRAID disk resource by
doing the following:
a. On Server A, run the Microsoft Cluster Administrator program and click the
cluster name to select the cluster you are using.
b. Verify that the same server (for example, Server A) owns the ServeRAID
disk resources and the localquorum resource and that the quorum resource
is moved to a RAID level-1 logical drive.
Note: Set the quorum resources on a RAID level-1 logical drive. Do not
set the quorum resources on a RAID level-5 logical drive.
c. Using the right mouse button, click the cluster name to open the cluster.
d. Select Properties; then, select the Quorum tab.
e. In the Quorum Resource field, select a ServeRAID shared disk.
f. Click OK.
g. Delete the Local Quorum Resource and the Local Quorum Group.
Chapter 14. Installing the Microsoft Cluster Service software
109