3. Type the following:
4. Press Enter.
The program starts in Information mode and a window similar to the previous
window opens.
Starting the ServeRAID Manager program in OpenServer, UnixWare,
and Linux
Use these procedures to start the ServeRAID Manager program in OpenServer,
UnixWare, and Linux.
Note: Ensure that you have superuser privileges before starting these procedures.
1. Change to the directory where you installed the ServeRAID Manager program
For OpenServer
For UnixWare
For Linux
2. Press Enter.
3. Type the following:
4. Press Enter.
The program starts in Information mode and a window similar to the previous
window opens.
Note: (UnixWare only) When installed on UnixWare, the ServeRAID Manager
88
®
IBM
User's Reference: ServeRAID
RaidMan
by typing:
sh RaidMan.sh
program might list the installed ServeRAID controllers in a different order
than the ServeRAID Manager program in startable-CD mode. To identify a
specific controller, refer to its physical slot number.
™
-4 Ultra160 SCSI Controller
cd /opt/RaidMan
cd /opt/RaidMan
cd /usr/RaidMan