IBM ServeRAID-4 Ultra160 Series User Reference page 105

Figure 22. Information mode window
Starting the ServeRAID Manager program in NetWare
To start the ServeRAID Manager program in NetWare:
1. From the NetWare console, type:
2. Press Enter.
The program starts in Information mode and a window similar to the previous
window opens.
Starting the ServeRAID Manager program in OS/2
To start the ServeRAID Manager program from the OS/2 desktop, double-click the
ServeRAID Manager icon. To start the ServeRAID Manager program from an OS/2
command line:
1. Change to the directory where you installed the ServeRAID Manager program
2. Press Enter.
LOAD RAIDMAN
by typing the following:
cd \RaidMan
Chapter 10. Installing and starting the ServeRAID Manager program
87