IBM ServeRAID-4 Ultra160 Series User Reference page 49

Figure 9. Information mode window
2. Continue with one of the following:
Using Configuration mode
You can use Configuration mode to create up to eight independent disk arrays for
each ServeRAID controller. Configuration mode provides two configuration options:
Express configuration and Custom configuration (see Figure 8 on page 30). You can
also use Custom configuration to create spanned arrays and configure the logical
drive to RAID level-x0. For more information about RAID level-x0, refer to
"Understanding RAID level-x0" on page 22.
(Create arrays) on the tool bar to switch from Information mode
Click
to Configuration mode.
v "Using Configuration mode".
v "Using Information mode" on page 39.
Chapter 4. Configuring ServeRAID controllers
31