Installing Serveraid Manager On Windows 2000, Windows Nt 4.0, Windows 98, Or Windows 95; Starting The Serveraid Manager Program; Starting The Serveraid Manager Program In Windows 2000, Windows Nt, Windows 98, Or Windows 95 - IBM Netfinity ServeRAID-4L Ultra160 User Reference

When using:
Windows 98
Windows 95
Installing ServeRAID Manager on Windows 2000, Windows NT 4.0,
Windows 98, or Windows 95
Note: This version of the ServeRAID Manager program supports up to 12
To install the ServeRAID Manager program for Windows NT 4.0, Windows 2000,
Windows 98, or Windows 95, do the following:
1. Insert the IBM ServeRAID Support CD into the CD-ROM drive.
2. The installation program starts. Follow the instructions on the screen to install

Starting the ServeRAID Manager program

After you have configured your ServeRAID controller, installed the device drivers,
installed the operating system, and installed the ServeRAID Manager program on
your server, you can administer and monitor your ServeRAID controllers, as well as
modify the ServeRAID controller configuration.
Starting the ServeRAID Manager program in Windows 2000, Windows
NT, Windows 98, or Windows 95
To start the ServeRAID Manager program in Windows 2000, Windows NT, Windows
98, or Windows 95, click Start → Programs → ServeRAID Manager → ServeRAID
Manager. The Control panel window opens. The program starts in Information
mode and a window similar to the following opens.
® ®
52
IBM Netfinity : ServeRAID
Go to:
"Installing ServeRAID Manager on Windows 2000, Windows NT 4.0,
Windows 98, or Windows 95".
"Installing ServeRAID Manager on Windows 2000, Windows NT 4.0,
Windows 98, or Windows 95".
ServeRAID controllers when using Microsoft NT 4.0 or Windows 2000.
the program.
™
-4L Ultra160 SCSI Controller User's Reference