Table of Contents
Advertisement
readahead
Use the readahead function to enable, disable, or set the adaptive
mode for the read-ahead feature of the ServeRAID controller.
Supported operating systems: Windows NT
Command: ipssend readahead controller options
where:
v controller is the ServeRAID controller number (1–12)
v options is one of the following:
– ON enables the read-ahead feature
– OFF disables the read-ahead feature
– ADAPTIVE indicates that the controller will determine the best
mode to use at any given time.
– ? displays the current read-ahead feature mode being used.
unattended
Use the unattended function to enable or disable the unattended
feature of the ServeRAID controllers.
Supported operating systems: Windows NT, Windows 2000
Command: ipssend unattended controller options
where:
v controller is the ServeRAID controller number (1–12)
v options is one of the following:
– ON to enable the feature
– OFF to disable the feature
– ? to display the current setting of this feature.
Chapter 7. Installing and using the IPSSEND command-line program
49
Advertisement
Table of Contents
