Table of Contents
Advertisement
Figure 3. Connecting a ServeRAID-4H controller internal channel connector
11. Connect the other end of the SCSI cable to the SCSI PCI backplane or to a
SCSI device in the server. (See your server documentation or the system label
inside the server cover for the location of the SCSI connector on the
backplane.)
12. If you have physical drives to install, install them now. See your server
documentation for drive installation instructions.
Note: The ServeRAID controllers use SCSI ID 7.
13. Install the server cover.
14. If you disconnected the cables and power cords in step 2 on page 5, reconnect
the cables and cords. See your server documentation if you need detailed
instructions.
15. If you want to attach an external SCSI device to the ServeRAID controller,
continue with "Connecting external devices" on page 8. Otherwise, go to
"Chapter 3. Understanding RAID technology" on page 9.
Chapter 2. Installing and cabling a ServeRAID controller
7
Advertisement
Table of Contents
