IBM Netfinity ServeRAID-4L Ultra160 User Reference page 42

Figure 7. Configuration summary window
5. Click Apply to accept and save the configuration. The configuration is saved in
6. If you have multiple controllers, for each controller repeat steps 1 on page 27
7. When you have completed configuration, you can change to Information mode
8. Restart the server.
9. Continue with "Chapter 5. Installing ServeRAID device drivers" on page 35 to
® ®
28
IBM Netfinity : ServeRAID
Notes:
a. Some operating systems have size limitations for logical drives. Before you
save the configuration, verify that the size of the logical drive is appropriate
for your operating system. See your operating-system documentation for
more detailed information.
b. To change the configuration, click Modify arrays or Modify logical drives.
the ServeRAID controller and in the physical drives.
through step 5.
and change controller settings. See "Using Information mode" on page 34 for
more information. If you do not want to change any settings, exit the ServeRAID
Manager program and remove the CD from the CD-ROM drive.
install the ServeRAID device driver while installing your operating system.
™
-4L Ultra160 SCSI Controller User's Reference