IBM Netfinity ServeRAID-4L Ultra160 User Reference page 40

Figure 6. Information mode window
2. Continue with one of the following:
Using Configuration mode
You can use Configuration mode to create up to eight independent disk arrays for
each ServeRAID controller. Configuration mode provides two configuration options
Express configuration and Custom configuration (see Figure 5 on page 25). You can
also use Custom configuration to create spanned arrays and configure the logical
drive to RAID level-x0. For more information about RAID level-x0, refer to
"Understanding RAID level-x0" on page 16.
® ®
26
IBM Netfinity : ServeRAID
(Create arrays) on the tool bar to switch from Information mode
Click
to Configuration mode.
v "Using Configuration mode".
v "Using Information mode" on page 34.
™
-4L Ultra160 SCSI Controller User's Reference