IBM Netfinity ServeRAID-4L Ultra160 User Reference page 46

11. If free space is available and you want to define another logical drive, click
Figure 11. Adding another logical drive
12. Repeat steps 9 on page 31 through 11 for each logical drive that you want to
13. If you are defining multiple arrays, click the next New array tree node; then,
14. Click Next. The Configuration summary window opens.
15. Review the information that displays in the Configuration summary window.
® ®
32
IBM Netfinity : ServeRAID
b. Some operating systems have size limitations for logical drives. Before you
save the configuration, verify that the size of the logical drive is appropriate
for your operating system. See your operating-system documentation for
more detailed information.
c. Typically, the first logical drive defined on the first ServeRAID controller
found by system BIOS during startup will be your startup (boot) drive.
Add in the Main Panel.
define in this array; then, continue with step 13.
repeat steps 9 on page 31 through 12. When you are finished, go to step 14.
™
-4L Ultra160 SCSI Controller User's Reference