Car Seat Shoulder Height Positions; Base Recline - Baby Trend Cover Me CV89 Owner's Manual

5.0 Installation and Use
5.13.1 Harness Length Adjustment Continued
6. Fold webbing over metal
plate and secure with hook
and loop fastener (Fig 57a).
7. Ensure the harness strap
ends are fully hooked on the
metal plate. Both sides must
be threaded in the same
position (Fig 57b).
8. Place child in car seat and
secure harness to confirm
proper shoulder height
position.
NOTE: The Rear-Facing
proper height of the harness
straps are at or just below
your child's shoulders.
57
Internal Harness Mode
Fig. 57a
Fig. 57b
Fig. 57c
Copyright © 2020, Baby Trend, Inc.
5.0 Installation and Use

5.14 Car Seat Shoulder Height Positions

1. There are 7 should height
position on this car seat
(Fig. 58a).
• Forward-Facing Positions
5, 6 and 7.
• Rear-Facing Positions
1, 2, 3 and 4.

5.15 Base Recline

1. The are 5 adjustments
positions on this car seat
(Fig. 58b).
2. Base recline adjustment
located at front of car seat.
Lift blue Recline handle to
release and rotate car seat
into desired position
(Fig. 58c).
Copyright © 2020, Baby Trend, Inc.
Internal Harness Mode
7
6
5
4
3
2
1
Fig. 58a
Fig. 58b
Fig. 58c
58