Baby Trend Cover Me CV89 Owner's Manual page 37

5.0 Installation and Use
5.26.1 Low Birth Weight Harness Shortening Routing Continued
7. Adjust base recline to the full recline postion.
1. See section (5.15 Base Recline page 58).
8. Must use crotch buckle in position 1 and the
belt shortening clip. Always put crotch buckle
and place into position 1 and use the belt
shortening clip (Fig. 71a). See section
(5.25.1 Belt Shortening Clip page 68).
9. Pull the crotch buckle anchor and belt
through to position 2 (Fig. 71a).
10. From top side feed harness loop down
though bottom of seat slot
11. Turn car seat over and feed harness loop
end back through slot (2) (Fig. 72a).
12. Turn car seat upright and feed through
(3)
harness lot (Fig. 72a).
13. On opposite side, Turn seat over and feed
harness loop through slot number
(Fig 72a).
14. From top side feed harness loop end down
(2)
through slot number (Fig 72a).
15. Turn seat over and feed harness end up
through slot number (1) (Fig 72a).
71
Internal Harness Mode
Seat Cut-Away
Buckle
Anchor Bracket
Belt Shortening Clip
Fig. 71a
(1) (Fig. 72a).
(3)
Copyright © 2020, Baby Trend, Inc.
5.0 Installation and Use
5.26.2 Low Birth Weight Harness Shortening Routing Continued
Seat Cut-Away
Diagram for
10-18
Steps
12 10
11
3 2 1
Copyright © 2020, Baby Trend, Inc.
Internal Harness Mode
14
13 13 or 18
15 13
Fig. 72a
Shoulder height
levels
Numbered Slot
adjustments
1 2 3
1
Crotch buckle
2
adjustments
72