Harness Height Adjustment Positions 1-2; Harness Length Adjustment - Baby Trend Cover Me CV89 Owner's Manual

5.0 Installation and Use

5.12 Harness Height Adjustment Positions 1-2

Harness shoulder height positions 1 & 2:
• Rear-facing use only.
• Lower birthweight children.
• Low birthweight routing.
1. Loosen harness straps by pressing
the Harness Tension Adjuster Button
and pulling the Harness straps toward
you (Fig. 55a).
2. From the backside of the car seat
unfasten harness end loops from
metal plate (Fig. 55b).
55
Internal Harness Mode
(2)
(1)
Fig. 55a
5
4
3
2
1
Fig. 55b
Copyright © 2020, Baby Trend, Inc.
5.0 Installation and Use

5.13 Harness Length Adjustment

3. From the front side pull harness end
loops through seatback (Fig 56a).
4. Thread harness end loops through
seatback to desired shoulder position
1 or 2 (Fig 56b).
NOTE: The Rear-Facing proper height
of the harness straps is at or just
below your child's shoulders.
5. From backside fasten harness end
loop A to metal plate. (Fig 56c).
Copyright © 2020, Baby Trend, Inc.
Internal Harness Mode
(1)
Fig. 56a
(2)
(1)
Fig. 56b
Fig. 56c
56