Shoulder Height Adjustment - Baby Trend CV88C Owner's Manual

5.0 Installation and Use
6. Pull on the harness tension adjuster to
tighten harness straps (Fig. 43a). The strap
should not allow any slack. The strap should
not press on to the child's skin or push the
child's body into an unnatural position.
To Loosen Harness System Tension, push the
harness tension adjuster button underneath
the fabric (Fig. 43b) and gently pull on the
harness straps over the child's shoulder.

5.11 Shoulder Height Adjustment

1. Shoulder Height Positions Facing Direction
Rear Facing: Positions 1, 2 and 3.
Forward Facing: Positions 3 and 4.
Note: Forward facing occupants weighing
more than 32 lbs (14.5 kg) or 35 inches
(88.9 cm) MUST use height position 4.
Height Adjustment
2. Pull harness release handles outward.
43
Fig. 43a
Fig. 43b
4
3
2
1
Copyright © 2016, Baby Trend, Inc.
5.0 Installation and Use
3. Raise or lower to the appropriate position.
Removable Headrest Use Requirements
Weight is 22 lbs (9.98 kg) or less.
Height is 28 inches (71.12 cm) or less.
4. Removable Headrest Positions Facing
Direction
Rear Facing: Positions 1 and 2.
NOTE: Only use in a rear facing position.
NEVER use in a forward facing position.
5. Remove Headrest: Place shoulder adjuster
in position 1 or 2. Press down on both
release tabs. Press release tabs through the
opening (Fig. 44a). Store removable headrest
in secure location, NOT the automobile
occupant space.
6. Install Headrest: Place shoulder adjuster in
position 1 or 2. Insert headrest tabs into T-slot
on shoulder adjuster (Fig. 44b). Press locking
tabs in to the locked position (Fig. 44c).
NOTE: Pull on headrest to ensure the
headrest is locked into position.
Copyright © 2016, Baby Trend, Inc.
4
3
2
1
Fig. 44a
Fig. 44b
Fig. 44c
44