Shoulder Height Adjustment; Crotch Buckle Position - Baby Trend CV88A Owner's Manual

Hide thumbs Also See for CV88A:
Table of Contents

Advertisement

5.0 Installation and Use
4. Insert the buckle tongues into the buckle
(Fig. 37a).
Note: Pull up and test buckle tongues to be
sure they are secure.
5. Place chest clip at arm pit level (Fig. 37b).
Insert chest clip tabs and press together. Pull
outward on chest clip's ends to be sure it is
secure.
6. Pull on the harness tension adjuster to
tighten harness straps (Fig. 37c). The strap
should not allow any slack. The strap should
not press on to the child's skin or push the
child's body into an unnatural position.
To Loosen Harness System Tension, push
the harness tenshion adjuster button
(Fig. 37d) underneath the fabric and gently
pull on the harness straps over the child's
shoulder.
37
Fig. 37a
Fig. 37b
Fig. 37c
Fig. 37d
Copyright © 2016, Baby Trend, Inc.
5.0 Installation and Use

5.11 Shoulder Height Adjustment

1. Shoulder Height Positions Facing Direction
Rear Facing: Positions 1, 2 and 3.
Forward Facing: Positions 3 and 4.
Note: Forward facing occupants weighing
more than 32 lbs (14.5 kg) or 35 inches
(88.9 cm) MUST use height position 4.
Height Adjustment
2. Pull harness release handles outward.
3. Raise or lower to the appropriate position.
5.12 Crotch Buckle Position
1. Press the crotch buckle release button
down with fingers and move position.
2. Crotch buckle placement:
Rear facing - rear most position
Forward facing - forward most position
Copyright © 2016, Baby Trend, Inc.
4
3
2
1
38

Advertisement

Table of Contents
loading

Table of Contents