Shoulder Height Adjustment; Crotch Buckle Position; Harness Length Adjustment - Baby Trend PROtect Series Owner's Manual

5.0 Installation and Use
6. Pull on the harness tension adjuster to
tighten harness straps (Fig. 43a). The strap
should not allow any slack. The strap should
not press on to the child's skin or push the
child's body into an unnatural position.
To Loosen Harness System Tension, push the
harness tension adjuster button underneath
the fabric (Fig. 43b) and gently pull on the
harness straps over the child's shoulder.

5.11 Shoulder Height Adjustment

1. Shoulder Height Positions Facing Direction
Rear Facing: Positions 1, 2 and 3.
Forward Facing: Positions 3 and 4.
NOTE: Forward facing occupants weighing
more than 32 lbs (14.5 kg) or 35 inches
(88.9 cm) MUST use height position 4.
Height Adjustment
2. Pull harness release handles outward.
3. Raise or lower to the appropriate position.
43
Fig. 43a
Fig. 43b
4
3
2
1
Copyright © 2018, Baby Trend, Inc.
5.0 Installation and Use

5.12 Crotch Buckle Position

1. Press the crotch buckle release button
down with fingers and move position.
2. Crotch buckle placement:
Rear facing - rear most position
Forward facing - forward most position

5.13 Harness Length Adjustment

A- Protect Convertible manufactured before 03/20/2017 Follow A.1.
Protect Convertible manufactured on or after 03/20/2017 Follow
A.2.
1. Unhook the harness straps from the metal
plate and move to the desired adjustment.
A.1 Feed one Harness Strap Connector plate through each Harness
Strap End (1). Rotate other Harness Strap Connector plate and
feed through each Harness Strap End (2). Ensure that the straps
are securely connected to both connector plates (3).
1
Copyright © 2018, Baby Trend, Inc.
2 3
44