Operation And Adjustments; Assembly And Removal Of Back Support; Changing Harness Strap Adjustment - Baby Trend EuroSport Owner's Manual

Operation and Adjustments

10.0

10.1 Assembly and Removal of Back Support

Before using your Car Seat in your vehicle, you must assemble the
Back Support and prepare the Car Seat harness straps for your child.
To assemble Back Support:
• Place Car Seat on the floor or other
firm surface and loosen the harness
so Back Support can lay flat behind
the seat base (see "Adjustment of the
Harness Straps" section 11.2).
• Align both tabs on bottom of Back
Support with openings in back of the
seat base 1 .
• Rotate Back Support forward to an
upright position 2 pressing down
firmly on top of Back Support until you
hear a "click" and both tabs are fully
inserted into the openings and the
Back Support feels secure and stable
• Check to be sure no parts of the harness
straps or seat pad are trapped between
the Back Support and the seat base
To remove Back Support:
• Place Car Seat on the floor or other
firm surface.
• While holding the Car Seat base down,
pull Back Support straight up until it stops,
then rotate backrest backward and lift out.
NOTE: Follow steps shown in illustrations
but in reverse order.
1
2
3 .
3
4 .
4
75
Operation and Adjustments
10.0

10.2 Changing Harness Strap Adjustment

WARNING!
• To prevent injury from contact with the vehicle interior or
ejection, the harness system must be snugly adjusted
around child.
The harness system on this Car Seat has an adjuster on each harness
strap allowing independent adjustment of each harness strap for a snug
fit on your child.
Each Harness Strap Adjuster has
a Green Tension Indicator that
slides up and becomes visible
when the harness is adjusted
properly. Always check that
Green Tension Indicator is
showing and that harness
is properly tightened on
your child.
To tighten harness strap:
1. While holding onto shoulder belt adjuster
pull down on Harness Adjuster strap to snugly
adjust harness strap. Tighten until Green
Tension Indicator is showing.
2. Repeat on the other harness
strap to snugly adjust harness
strap.
Green Tension
Indicator
Harness Strap
Adjuster
Green
Tension
Indicator
76