Installation; Charging Station - Husqvarna Automower 305 Technical Manual

Hide thumbs Also See for Automower 305:
Table of Contents

Advertisement

3 Installation

3�1 Charging station
The placement of the charging station should be
well planned in order to give the best installation
and function of the Husqvarna Automower® 305.
The charging station should have a central
placement in the working area, so that the
Automower® 305 is close to all parts of the
installation.
The charging station must be positioned so
that the boundary wire can be laid 2 metres
straight out to the left and 2 metres straight
to the right from the charging station. See
the Operator's Manual.
The one exception to this rule is if the
boundary wire to the left of the charging
station (viewed from the front of the
charging station and facing the charging
station) is run away from the charging
station. It is then sufficient to run the
boundary wire 1 metre straight out to
the left before running it away from the
charging station. See illustration below.
min 1m
The charging station must be positioned so
that the guide cable can be laid 2 metres
straight out from the front edge of the

charging station.

The only exception to this rule is if the
guide cable is laid to the left. Then it is
sufficient to run the guide cable 1.5 metres
straight out from the front edges of the
charging station. See illustration below.
Englsih - 24
3� INSTALLATION
3012-931
min 2m
3020-011
min 1,5m
The charging station must be positioned so
that the entire guide wire is not too long. The
guide loop should not be longer than about
250 metres.
The guide loop is defined as the guide wire
from the charging station to the T-connector
in the boundary loop plus the boundary wire
from the T-connector to the charging station,
going left from the T-connector. See 3.3 Guide
wire on page 26.
The charging station must be positioned on relatively
level ground. See illustration below.
3
The charging station must be positioned so
that the boundary wire can be run straight
out from the charging station. See illustration
below. If the boundary wire is laid in any other
way, the mower may find it hard to find the
charging station.
min 2m
3020-012
3012-932
3012-1018

Advertisement

Table of Contents
loading

Table of Contents