Electrical Adjustment; Preparation; Equipment Required - Sony HXCU-TX70 Service Manual

5-1.

Preparation

5-1-1.

Equipment Required

• SD waveform/vector monitor
• Analog HD waveform monitor
• Oscilloscope: Tektronix TDS460A or equivalent
• Frequency counter: Advantest TR5821AK or equivalent
• Audio oscillator: Tektronix SG-5010 or equivalent
• Audio analyzer
• FM signal generator: ROHDE & SCHWARZ SMHU58 or equivalent
Related equipment
• HD color camera HXC-D70 or solid-state memory camcorder PMW-500/400/350/320
• HD camera adaptor CA-TX70
• Remote control panel RCP-1000 series
Precautions on Adjustments
• Warm up the unit for about 10 minutes before starting adjustments.
• All measuring equipment must have been calibrated.
• "Initial Settings" must have been completed.
• Adjustments for HD color camera must have been completed.
HXCU-TX70
Section 5

Electrical Adjustment

5-1