Network Easy Setting - Panasonic SA-BTT775GA Service Manual

5.5.

Network Easy Setting

Network Easy Setting
For Asia
After completing "Easy setup", you can perform "Network Easy
Setting".
The country selection screen appears.
Select "Yes" or "No" and press [OK].
Network Easy Setting
Is this unit being used in any of the following
countries?
- Malaysia, Thailand, Singapore or Hong Kong
Network functions could not work properly unless the
correct answer is selected.
Yes
OK
RETURN
(For other than Malaysia, Thailand, Singapore and Hong Kong)
You cannot use wireless LAN connection. Select "No" and
press [OK].
When you select "No"
(For other than Malaysia, Thailand, Singapore and Hong Kong)
Follow the on-screen instructions and make
the settings with [ ,
Network Easy Setting
LAN setup and testing of home network and Internet
connections are required for Internet functions
(BD-Live etc.).
Broadband Internet connection is necessary for BD-Live.
Is a LAN cable already connected ?
Please refer to the operating instructions about network
connection.
Press [OK] to proceed.
OK
RETURN
When you experience problems
No
] and press [OK].
When you select "Yes"
(For Malaysia, Thailand, Singapore and Hong Kong)
Select "Wired" or "Wireless" and press [OK].
Network Easy Setting
Settings and tests for connection required
for home network and the Internet will be
conducted.
First, please select a connection mode.
Current setting : Wired
Wired
Wireless
OK
RETURN
"Wired" connection
Follow the on-screen instructions to make your connection settings.
When you experience problems
"Wireless" connection
Before beginning wireless connection setup
Obtain your network name (SSID
If your wireless connection is encrypted please be sure
that you know your encryption key.
If "Wireless LAN Adaptor is not connected." is displayed,
check that the Wireless LAN Adaptor is fully inserted.
Alternatively, disconnect and reconnect it. If there is still no
change in the display, consult your dealer for advice.
Select "WPS (PUSH button)" or "Search for
wireless network" and then follow the
on-screen instructions and make the settings.
Wireless Settings
Select a connection method to wireless access point.
Please refer to the operating instructions of your wireless
access point about connection methods.
Search for wireless network
WPS (PUSH button)
WPS (PUSH button):
If your Wireless router supports WPS
(PUSH button), you can easily perform
the settings by pressing WPS button on it.
WPS (Wi-Fi Protected Setup) is a
standard that facilitates settings relating to
the connection and security of wireless
LAN devices.
Press WPS button or corresponding button of Wireless
router until the lamp starts flashing.
For details, refer to the operating instruction of Wireless
router.
Press [OK].
21
*1 ).
e.g.,
2
*