Panasonic SA-BTT775GA Service Manual page 78

10.15.3.2. Assembly of Traverse Unit
Step 1 Align the Mid Base parallel with Traverse unit.
Step 2 Push to fix Mid Base into the Damper as shown.
Caution: Ensure the Mid Base is seated properly.
Step 3 Desolder the solder point to open circuit.
Step 4 Connect OPU FFC and remove ESD Prevention Bag
from the 45P FFC.
Step 5 Insert the Traverse Deck underneath of the chassis
plate.
Caution: During assembling, ensure the Traverse Deck do
not hit to the Slide Cam.
78