Step 5: Easy Setup; Network Easy Setting - Panasonic SC-BFT800 Operating Instructions Manual

STEP 5: Easy setup

The Easy setup assists you to make necessary
settings.
Follow the on-screen prompts to make basic settings for the
system.
Preparation
≥ Turn on your TV and select the appropriate video input mode
(e.g., VIDEO 1, AV 1, HDMI, etc.) to suit the connections to
this unit.
≥ Confirm the digital transmitter connection. (
1
Press [Í] to turn on this unit.
2
Press [C I, B Í] on the active subwoofer
to turn it on.
≥ Make sure the wireless link indicator lights green. (
3
Follow the on-screen instructions and
make the settings with [3, 4, 2, 1] and
press [OK].
Language
Select the language used on menu screen.
TV Aspect
Select the aspect to suit your TV and preference.
Speaker check
Check if the connection to each speaker is valid.
TV Audio
Select the audio input connection from your TV,
[item with "(TV)"].
Quick Start
Speed of startup from standby mode is increased.
4
Press [OK] several times to finish the "Easy
setup".
After completing "Easy setup", you can perform "Network Easy
Setting".
≥ You can perform this setup anytime by selecting "Easy setup" in the Setup
menu. ( 41)
≥ Language and TV Aspect settings are automatically retrieved if this unit is
connected to a Panasonic TV (VIERA) supporting HDAVI Control 2 or later
via an HDMI cable.
OK
OK
16)

Network Easy Setting

When "BD/DVD" is selected as the source
Select "Wired" or "Wireless" and press [OK].
Network Easy Setting (Connection Test)
Select a connection mode.
Current setting
LAN cable connection:
Connect a LAN cable to the unit and select "Wired".
Wireless LAN connection:
Connect the Wireless LAN Adaptor (DY-WL10) to the USB
port and select "Wireless".
OK
RETURN
∫ "Wired" connection
Follow the on-screen instructions to make your connection settings.
≥ When you experience problems (
∫ "Wireless" connection
If you select "Wireless" and "Wireless LAN Adaptor is not
connected." is displayed, check that the Wireless LAN Adaptor is
fully inserted. Alternatively, disconnect and reconnect it. If there is
still no change in the display, consult your dealer for advice.
Select "WPS (PUSH button)" or "Search for
access point" and then follow the on-screen
instructions and make the settings.
Access Point Connection Setting
Select a connection method for access to
Wireless LAN.
Please refer to the operating instructions of
the access point about connection methods.
18)
WPS (PUSH button):
If your Wireless router (Access point)
supports WPS (PUSH button), you can
easily perform the settings by pressing
WPS button on it.
WPS (Wi-Fi Protected Setup) is a
standard that facilitates settings relating
to the connection and security of
wireless LAN devices.
1 Press WPS button or corresponding button of Wireless
router (Access point) until the lamp starts flashing.
≥ For details, refer to the operating instruction of Wireless
router (Access point).
2 Press [OK].
Search for access point:
Available Wireless routers (Access points) are searched and
listed. You can select the one to use from the list.
1 Press [3, 4] to select SSID*
point) you want to connect with. Then press [OPTION] to
show information of the selected router, make a note of the
authentication and encryption type.
Access Point Connection Setting
Select an access point to connect with.
To search for access point again, please
select "Search again" below.
SSID
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
SSID
XXXXXXXXXX
Wireless type
XXXXXXXXXX
Authentication type
XXXXXXXXXX
XXXXXXXXXX Encryption type
XXXXXXXXXX
: Wired
Wired
Wireless
20)
WPS (PUSH button)
Search for access point
e.g.,
2 of Wireless router (Access
Reception
:XXXXXXXXXXXXXXX
:802.11n/g/b (2.4GHz)
:WPA-PSK
:AES
Search again
OK
(Continued on the next page)
1
VQT2Z56
19