Model No. SC-BTT560 SC-BTT500 SC-BTT460 SC-BTT400 Unless otherwise indicated, illustrations in these operating instructions are of SC-BTT560. Firmware updates Panasonic is constantly improving the unit’s firmware to ensure that our customers are enjoying the latest technology. Panasonic recommends updating your firmware as soon as you are notified.
≥ Keep the screws out of reach of children to prevent swallowing. Panasonic will in no way be responsible for any incidental damage which may arise due to a failure to obey these limits, or to any condition of use or disuse of these devices.
To dispose or transfer this unit Restriction on use of unauthorized copied content The unit may keep the user settings information in the unit. If you discard this unit either by disposal or transfer, then follow the This unit adopts the following technology for copyright protection. procedure to return all the settings to the factory presets to delete the user settings.
Package contents and accessories Getting started Check the package contents and supplied accessories before using this unit. Package contents Main unit Main unit Main unit Main unit (SA-BTT560) (SA-BTT500) (SA-BTT460) (SA-BTT400) FRONT SURROUND FRONT FRONT SURROUND FRONT (SB-HF5600) (SB-HS5600) (SB-HF5000) (SB-HF4800) (SB-HS4000) (SB-HF4000)
∏ 2 Batteries for remote control ≥ This lens cleaner may not be available for sale in all countries, e.g. not available in Germany, please consult your Panasonic ∏ 1 AC mains lead dealer for advice. For the United Kingdom and Ireland ≥...
® Resolution Audio and DTS-HD Master Audio) ∫ BD-RE, BD-R adopted in BD-Video. Discs recorded in DR mode using Panasonic Blu-ray Disc recorders may not play back the ∫ 3D audio etc., correctly. ≥ 3D videos and 3D still pictures can be played...
Control reference guide Turn the unit on and off Remote control Select title numbers, etc./Enter numbers or characters e.g., [For[the[United[Kingdom[and[Ireland] [CANCEL]: Cancel Select the source Basic playback control buttons ( Select preset radio stations ( Show status messages ( Show the Home screen of the VIERA Connect ( [3, 4, 2, 1] : Move the highlight for selection [OK] : Confirm the selection...
Page 10
Main unit (Front) [BTT560] [BTT500] SD CARD [BTT460] [BTT400] Standby/on switch (Í/I) ( [BTT560] [BTT500] Press to switch the unit from on to standby Start play ( mode or vice versa. In standby mode, the unit SD card slot ( is still consuming a small amount of power.
Page 11
Main unit (Rear) [BTT560] [BTT500] 9 10 [BTT460] [BTT400] AC IN terminal ( [BTT560] [BTT500] Speaker terminals ( HDMI1 IN (CABLE/SAT) terminal ( Cooling fan [BTT560] [BTT500] LAN port ( HDMI2 IN terminal ( USB port ( 18, 32) DIGITAL AUDIO IN terminal ( 16, 17) HDMI AV OUT (ARC) terminal ( 16, 17)
[BTT560] [BTT500] Wireless connections (SH-FX71) ∫ Enjoy surround speaker sound wirelessly Use the optional Panasonic wireless system (SH-FX71). ∫ Upgrade to 7.1-channel system The main unit is designed to enjoy the 7.1ch surround sound. A more theatre-like effect is possible with a wireless connection.
STEP 2: Preparing the speakers Assembling the speakers [BTT560] [BTT460] Front speakers Attach the stand to the base. Attach the speaker. Thread the speaker cable through the base. Tighten the 3 screws (supplied) securely. Tighten the screw (supplied) securely. Groove ...
Connecting the speaker cables Attach the speaker cable sticker (supplied) and connect the speaker cables to the speakers. ≥ [BTT560] [BTT500] When connecting speakers with the optional wireless system SH-FX71 ( 12), use the supplied speaker cables of SH-FX71. e.g., Surround speaker r: White s: Blue line SURROUND...
STEP 3: Connections Turn off all equipment before connection and read the appropriate operating instructions. Do not connect the AC mains lead until all other connections are complete. Speaker connection Connect the speaker cables to the terminals of the same colour. VQT4Q16...
∫ HDMI ≥ Use the ARC compatible High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized. It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use HDMI cables 5.0 meters or less. ≥ Audio will be output through the system’s speakers when “Off” is selected in “HDMI Audio Output”. ( ∫...
Page 17
Other device connection ∫ [BTT560] [BTT500] When the connecting devices have an HDMI terminal e.g., AV OUT AV OUT AV IN Set Top Box, etc. (ARC) Video game, etc. HDMI cable (not supplied) HDMI cable (not supplied) HDMI standby pass-through Even if this system is in standby mode, the audio and/or video signal from the device connected to the HDMI1 IN (CABLE/SAT) or HDMI2 IN terminal will be sent to the TV connected to the HDMI AV OUT terminal (the sound will not be output from this system).
Wireless router, etc. Internet ≥ For up-to-date compatibility information on your wireless router, refer to http://panasonic.jp/support/global/cs/ (This site is in English only.) ≥ The unit is not compatible with public wireless LAN services (Hotspot etc.) provided in airports, stations, cafes, etc.
STEP 4: Connecting the AC mains lead Connect only after all other connections are complete. [For[the[United[Kingdom[and[Ireland] BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 3 BEFORE CONNECTION. AC mains lead (supplied) To a household mains socket ≥...
WPS (Wi-Fi Protected Setup ) is Setting” in the Setup menu. ( ≥ If this unit is connected to a Panasonic TV (VIERA) a standard that facilitates settings relating to the supporting HDAVI Control 2 or later via an HDMI cable, connection and security of wireless LAN devices.
≥ You can perform this setup anytime by selecting “Easy Network Setting” in the Setup menu. ( If you have more than one Panasonic products ≥ You can redo these settings individually using “Network Settings”. ( and the remote control operates both products at once, you will need to change the remote control ≥...
≥ You cannot change the audio type when the TV is ≥ If you connect a Panasonic product with a USB connected to this unit via the AUX terminal. connection cable, the setup screen may be displayed on the connected equipment.
HOME menu Major functions of this unit can be operated from FM Radio the HOME menu. Preparation Turn on the television and select the appropriate Videos/Photos/Music video input on the television. Play back the contents. Disc Press [Í] to turn on the unit. SD Card ≥...
For more details, refer to HOME menu. the following website. Select ≥ Other than prepared http://panasonic.jp/support/global/cs/ (This site is in English only.) Wallpaper wallpapers, you can also select a photo in recording media as a wallpaper. ( 34, “Wallpaper”)
Playback Playback Search/Slow motion Search While playing, press [SEARCH6] or Insert the media. [SEARCH5]. Playback starts depending on the media. ≥ Music and MP3: The speed is fixed to a single Select the item to play and press [OK]. step. Repeat this procedure if necessary.
Page 26
Displaying menus and Enjoying 3D video and photos playback information Preparation Connect 3D compatible TV to an HDMI AV OUT Show top menu/pop-up menu terminal of this unit using a High Speed HDMI Press [POP-UP MENU/TOP MENU]. Cable. ( 16, 17) Select the item and press [OK].
Using the iPod/iPhone Slideshow Compatible iPod/iPhone (as of December 2012) Play a slideshow of photos and make various ≥ Update your iPod/iPhone with the latest settings during the playback. software before using this unit. ≥ Compatibility depends on the software version of your iPod/iPhone.
Connect the iPod/iPhone firmly. iPod/iPhone Connection ≥ Check that the connector (B) has no dust or foreign materials before connecting. Connect the iPod/iPhone to either of the USB port ≥ To connect the iPod/iPhone firmly, remove it or the Dock ([BTT560] and [BTT500] only). from the case, etc.
Panasonic When the unit is connected to a Panasonic TV TV (VIERA) under “HDAVI Control”. (VIERA) that supports HDAVI Control 2 or later. You can use this function by connecting Select “Video”...
Select the STB audio Enjoying TV and STB with unit’s speakers When the STB power is turned on, this unit and the TV will automatically turn on. The video is You can select whether audio is output from the output from the TV, and the audio is output from unit’s speakers or the TV speakers by using the the speakers of this unit.
Listening to the Radio ∫ Manual tuning and presetting Select a radio broadcast. You can preset up to 30 channels. 1 Press [RADIO] to select “FM”. Preparation 2 Press [SEARCH6] or [SEARCH5] to Make sure that the FM antenna is connected. ( select the frequency.
≥ The services through VIERA Connect are operated by their respective service providers, and service may be discontinued either temporarily or permanently without notice. Therefore, Panasonic will make no warranty for the * Images are for illustration purposes, contents may change content or the continuity of the services.
You can also enjoy viewing the video and photos recorded Server in Panasonic DLNA compatible recorders (DIGA). Renderer Refer to our website about the sales area, etc. ( right)
Option menu ∫ Repeat Play (Only when the elapsed time is being displayed A variety of playback operations and settings can on the unit’s display.) be performed from this menu. Select the item that you want to repeat. Available options differ depending on the playing ≥...
∫ Playback Information Window Picture Settings Displays the following. ∫ Picture Mode Audio/video attribute information of disc. Select the picture quality mode during play. Settings status of “Digital Audio Output” ≥ If you select “User”, you can change settings in 38).
Digital Tube Sound: Sound Settings This feature gives you warm sound, like that produced by a vacuum tube amplifier. “Surround Effects” and “Sound Effects” can also Recommended setting: be set by using the [SURROUND] and [SOUND] on the remote control. ( Digital Tube A crisp, delicate sound Sound 1...
Setup menu 3D Settings Change the unit’s settings if necessary. The ∫ Signal Format settings remain intact even if you switch the unit to standby. Original Keep original picture format. Some items in the Setup menu are common to 3D picture format comprising of the Option menu.
Page 38
∫ HDMI Output ∫ Still Mode Press [OK] to show the following settings: Select the type of picture shown when you pause playback. HDMI Video Format Automatically selects the type The items supported by the connected devices are Automatic of picture shown. indicated on the screen as “¢”.
Page 39
BD-Video Secondary Audio Select whether or not to mix the primary and secondary audio (including the button click ∫ 3D BD-Video Playback sound). Select the playback method of 3D compatible If “Off” is selected, the unit outputs the primary video software. audio only.
Page 40
Wireless Settings Language This allows the wireless router and connection settings to be set. Current connection settings ∫ Soundtrack Preference and connection state can be checked. Choose the language for audio. Connection Setting ≥ If “Original” is selected, the original language of The wireless router connection wizard will be each disc will be selected.
Page 41
∫ DVD-Video Ratings For the setting and operation method of connected Set a ratings level to limit DVD-Video play. equipment, refer to the following website. http://panasonic.jp/support/global/cs/ ∫ BD-Video Ratings (This site is in English only.) Set an age limit of BD-Video play.
Page 42
∫ Remote Control automatically. Change the remote control code if other ≥ While playing and pausing, etc., this function Panasonic products react to this remote control. is not available. ∫ Firmware Update ( On-Screen Messages Press [OK] to show the following settings: Choose whether to show status messages automatically.
∫ Delay time Speaker settings For optimum listening with 5.1-channel sound, all the speakers, except for the subwoofer, should be the same distance from the seating position. If either distance 1 or 2 is less than 3, measure the distance and adjust the time to make up for the difference (see the table below).
Changing the sound Speaker installation settings option For more details on each setting, refer to “Sound Consult a qualified building contractor when Settings” on the Option menu. ( attaching the speakers to a wall. Improper attachment may result in damage to the wall and Surround Effects speakers and personal injury.
Page 45
[BTT560] [BTT460] Front speaker To prevent tipping/falling of Attach to a wall without the base and the stand. the speakers Preventing tipping [BTT560] [BTT460] Front speaker Preventing falling Front speaker, Surround speaker, Centre speaker Thread a string to the speaker. ...
Troubleshooting guide This unit is turned off when the input for the Reference TV is switched. Before requesting service, please perform the This is a normal phenomenon when using following checks. VIERA Link (HDAVI Control 4 or later). For If the problem remains unresolved, consult details please read the operating instructions your dealer for instructions.
Page 47
The system used on the disc doesn’t match The unit switches to standby mode. your television. This unit will automatically turn to standby jPAL discs cannot be correctly viewed on an mode after 30 minutes if it is inactive. ( NTSC television.
Page 48
No sound from the TV. Sound Press [EXT-IN] to select the corresponding source. ( No sound. When connecting the unit to a TV using an Low volume. HDMI cable, check whether the HDMI Distorted sound. terminal on the TV is labelled “HDMI (ARC)”. Cannot hear the desired audio type.
Page 49
iPod/iPhone operation Network Cannot charge or operate. I can’t connect to the network. Check that the iPod/iPhone is connected Confirm the network connection and settings. firmly. ( 18, 20, 40) [BTT560] [BTT500] When iPod/iPhone devices There may be obstacles that prevent the unit are connected to both the USB port and the from detecting your home network.
Messages On the unit’s display The following messages or service numbers may appear on the TV or unit’s display. The unit fails to operate properly. Press [Í/I] On the television on the main unit for 3 seconds to switch the unit to standby, then switch back on.
Page 51
or F (“ ” stands for a number.) Check and correct the speaker cable connections. There is something unusual. Check the unit using the troubleshooting guide. If the service number remains displayed, do the following. 1 Disconnect the plug from the household mains socket, wait a few seconds, then reconnect it.
Specifications SPEAKER SECTION GENERAL Super Woofer Full range tweeter CONE TYPE CONE TYPE (cm) (cm) Piezo type Power consumption [BTT560] [BTT500] Approx. 89 W [BTT560] Front ≤ [BTT460] [BTT400] Approx. 80 W Centre ≤ Power consumption in Approx. 0.1 W Surround ≤...
FM TUNER SECTION File format Frequency range 87.50 MHz to 108.00 MHz File format Extension Reference (50 kHz step) This unit supports ID3 Antenna terminals 75 ≠ (unbalanced) tags, but only titles, “.MP3”, “.mp3” artist names and album names can be TERMINAL SECTION displayed.
“AVCHD”, “AVCHD 3D”, “AVCHD Progressive” and “AVCHD 3D/ Display languages list Progressive” are trademarks of Panasonic Corporation and Sony Corporation. Java is a registered trademark of Oracle and/or its affiliates. Display Language Display Language Display Language Manufactured under license from Dolby Laboratories.
Page 55
This product incorporates the following software: (1) the software developed independently by or for Panasonic Corporation, (2) the software owned by third party and licensed to Panasonic Corporation, (3) the software licensed under the GNU General Public License, Version 2 (GPL v2), (4) the software licensed under the GNU LESSER General Public License, Version 2.1 (LGPL v2.1) and/or,...
Page 56
≥ Or go on line through our Internet Accessory ordering application at www.pas-europe.com. ≥ Most major credit and debit cards accepted. ≥ All enquiries transactions and distribution facilities are provided directly by Panasonic UK. ≥ It couldn’t be simpler! ≥ Also available through our Internet is direct shopping for a wide range of finished products. Take a browse on our website for further details.