11 Service Position
Note: For description of the disassembly procedures, see
the Section 10.
11.1. Checking & Repairing of Digital
P.C.B.
11.1.1. Checking & Repairing of Digital
P.C.B. (Side B)
Step 1 Remove the Top Cabinet.
Step 2 Remove 1 screw.
Step 3 Release the Blue Wire (TL30) and White Wire (TL31)
from cord holders.
Caution: During assembling, ensure that Blue Wire (TL30)
& White Wire (TL31) are dressed into cord holders prop-
erly.
Step 4 Lift up the Voltage Selector Unit from Bottom Chassis.
Step 5 Lift up the Himelon.
Step 6 Remove 1 Rivet.
Step 7 Detach 11P FFC at the connector (CN1101) on Digital
P.C.B..
Step 8 Detach 3P Wire at the connector (P59300) on Digital
P.C.B..
Step 9 Remove 4 screws.
Step 10 Remove 9 screws.
Step 11 Release the tabs at both side of the Rear Panel in the
direction of arrow.
Step 12 Remove Digital P.C.B. Shield.
110