10.13. Disassembly of iPod P.C.B.
• Refer to "Disassembly of Top Cabinet".
• Refer to "Disassembly of Front Panel Block Assembly".
• Refer to "Disassembly of iPod Cradle Assembly".
Step 1 Remove 2 screws.
Step 2 Release 1 catch.
Step 3 Lift up the Cradle Tub.
Caution: During assembling, ensure that Cradle Tub is
properly fixed & fully catched into iPod Guide before
screwing.
Step 4 Lift up the iPod P.C.B..
Caution: During assembling, ensure that iPod P.C.B. is
properly located & fully inserted onto iPod Guide with 3P
Wire dressed according to diagram shown.
Step 5 Detach 3P Wire at the connector (P1000) on iPod
P.C.B..
Step 6 Detach 11P FFC at the connector (CN1002) on iPod
P.C.B..
Caution: Keep the 3P Wire and 11P FFC in safe place, place
it back during assembling.
Step 7 Remove the iPod P.C.B..
65