Step 9 Detach 13P Cable at the connector (CN2002) on Digital
P.C.B..
Step 10 Detach 10P Cable at the connector (CN2004) on Digi-
tal P.C.B..
Step 11 Remove 1 rivet.
Caution: Keep the Rivet in safe place, place it back during
assembling.
Step 12 Detach 22P FFC at the connector (CN2000) on Digital
P.C.B..
Step 13 Detach 18P FFC at the connector (CN2006) on Digital
P.C.B..
Step 14 Detach 17P FFC at the connector (CN2008) on Digital
P.C.B..
Step 15 Remove 7 screws.
Step 16 Release the tabs at both side of the Rear Panel in the
direction of arrow.
Step 17 Remove 4 screws.
Step 18 Remove the Digital P.C.B. Shield.
97