Step 5: Settings; Easy Setting; Easy Network Setting - Panasonic SC-BTT282 Operating Instructions Manual

STEP 5: Settings

Easy Setting

After connecting your new home theatre for the
first time and pressing [Í], a screen for the basic
settings will appear.
Preparation
Turn on the television and select the
appropriate video input on the television.
1
Press [Í].
Setup screen appears.
2
Follow the on-screen instructions and
apply the settings.
≥ You can perform this setup anytime by selecting "Easy
Setting" in the Setup menu. (
≥ If this unit is connected to a Panasonic TV (VIERA)
supporting HDAVI Control 2 or later via an HDMI cable,
then setting information on the TV such as "On-Screen
Language" is acquired by this unit.

Easy Network Setting

After completing "Easy Setting", you can perform
"Easy Network Setting".
Select "Wired" or "Wireless" and press [OK].
e.g., [BTT282]
Easy Network Setting
Select a connection mode.
Current setting : Wired
Wired
Wireless
OK
RETURN
∫ "Wired" connection
Follow the on-screen instructions to make your
connection settings.
∫ "Wireless" connection
Before beginning wireless connection setup
≥ Obtain your network name (SSID*
≥ If your wireless connection is encrypted, please
be sure that you know your encryption key.
≥ [BTT182] If "Wireless LAN Adaptor is not
connected." is displayed, check that the
Wireless LAN Adaptor is fully inserted.
Alternatively, disconnect and reconnect it. If
39)
).
1
there is still no change in the display, consult
your dealer for advice.
Select "Search for wireless network" or "WPS
(PUSH button)" and press [OK], then follow
the on-screen instructions and apply the
settings.
Wireless Settings
Select a connection method to wireless access point.
Please refer to the operating instructions of your wireless
access point about connection methods.
Search for wireless network
WPS (PUSH button)
WPS (PUSH button):
If your wireless router supports
WPS (PUSH button), you can
easily perform the settings by
pressing WPS button on it.
WPS (Wi-Fi Protected Setup
a standard that facilitates settings relating to the
connection and security of wireless LAN devices.
1 Press WPS button or corresponding button of
the wireless router until the lamp starts
flashing.
≥ For details, refer to the operating instruction
of the wireless router.
2 Press [OK].
Search for wireless network:
≥ When you select "Search for wireless network",
the available wireless networks will be
displayed. Select your network name and press
[OK].
– If your network name is not displayed, search
again by pressing the red button on the
remote control.
– Stealth SSID will not be displayed when you
select "Search for wireless network". Enter
manually by using "Manual setting".
(Press [HOME]
select "Setup" [OK]
[OK] select "Network Settings"
select "Wireless Settings"
"Connection Setting"
"Manual setting"
≥ If your wireless network is encrypted,
Encryption Key input screen will be displayed.
Input the encryption key of your network.
e.g.,
) is
TM
select "Others" [OK]
select "Network"
[OK]
[OK] select
[OK] select
[OK])
VQT3Z99
2
*
19