Disassembly Of Ipod Cradle Assembly - Panasonic SA-BTT775GA Service Manual

10.12. Disassembly of iPod Cradle
Assembly
• Refer to "Disassembly of Top Cabinet".
• Refer to "Disassembly of Front Panel Block Assembly".
Step 1 Open the iPod Cradle Assembly as diagram shown.
Step 2 Release 2 catches.
Step 3 Remove the Cradle Ornament in the direction of arrow.
Step 4 Upset the Front Panel Assembly.
Step 5 Remove 1 screw.
Step 6 Remove the Latch Holder Unit.
Caution: Keep the Latch Holder Unit in safe place, place it
back during assembling.
Step 7 Lift up the tesa tape.
Caution: Replace the tesa tape if torn.
Step 8 Release 11P FFC from the walls of Front Panel.
Caution: During assembling, ensure that 11P FFC is prop-
erly dressed in between walls of Front Panel.
Caution (1): During assembling, ensure that 3P Wire is
properly dressed through round of 11P FFC as diagram
shown.
Caution (2): During assembling, ensure that 11P FFC is
properly dressed into slot of Front Panel.
Step 9 Remove iPod Cradle Assembly.
64