10.17. Disassembly of D-Amp P.C.B.
• Refer to "Disassembly of Top Cabinet".
Step 1 Detach 4P Cable at the connector (CN5400) on D-Amp
P.C.B..
Step 2 Detach 18P FFC at the connector (CN5402) on D-Amp
P.C.B..
Step 3 Lift Up the Lead Clamper.
Step 4 Detach 3P Cable at the connector (CN5401) on D-Amp
P.C.B..
Step 5 Remove 2 screws.
Step 6 Remove 3 screws.
Step 7 Release the tab of the right side of the Rear Panel in the
direction of arrow.
Step 8 Remove D-Amp P.C.B. according to direction of arrow
shown.
93