Disassembly Of Fan; Disassembly Of Front Panel Assembly - Panasonic SA-BTT775GA Service Manual

Step 4 Remove 2 screws.
Step 5 Remove Voltage Selector Bracket.
Caution: During assembling, ensure that Voltage Selector
P.C.B. is properly fixed onto Voltage Selector Bracket
before screwing.
Step 6 Desolder Blue Wire (TL30) and White Wire (TL31) on
Voltage Selector P.C.B..
Step 7 Remove Voltage Selector P.C.B..

10.7. Disassembly of Fan

• Refer to "Disassembly of Top Cabinet"
Step 1 Twist the Wire Clamper.
Step 2 Detach the Fan connector (CN5401) on D-Amp P.C.B..
Step 3 Remove 2 screws.
Step 4 Lift up to remove Fan.
10.8. Disassembly of Front Panel
Assembly
• Refer to "Disassembly of Top Cabinet".
Step 1 Lift up Himelon.
Caution: Replace Himelon if torn.
Step 2 Lift up the Lead Clamper.
Step 3 Remove 2 rivets.
Caution: Keep the rivets in safe place, place it back during
assembling.
Step 4 Detach 11P FFC at the connector (CN1101) on Digital
P.C.B..
Step 5 Detach 3P Wire at the connector (P59300) on Digital
P.C.B..
Step 6 Detach 5P Cable at the connector (CN2001) on Digital
P.C.B..
59