Disassembly Of Ac Inlet P.c.b - Panasonic SA-BTT775GA Service Manual

Step 3 Solder pins of the Red Wire (+) & Black Wire (-) on the
Loading P.C.B..
Step 4 Dressed the wire into slots as shown.

10.16. Disassembly of AC Inlet P.C.B.

• Refer to "Disassembly of Top Cabinet"
Step 1 Remove 1 screw.
Step 2 Remove 2 screws.
Step 3 Release the Red (TL10) Wire & Black (TL20) Wire from
Wire Clamper.
Caution: During assembling, ensure that Red (TL10) Wire
& Black (TL20) Wire are dressed into Wire Clamper prop-
erly.
Step 4 Lift up the AC Inlet P.C.B. according to arrow shown.
91